ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Electroplating power supply/Low-ripple chrome plating power supply

Low-ripple chrome plating power supply: 1000–50000A, ≤3% ripple

JC POWER's low-ripple chrome plating power supply serves decorative and hard chrome lines where finish quality tracks ripple. It covers 1000–50000A at 0–48V, holds ripple at ≤3%, and keeps voltage and current regulation within ≤1%. Cooling follows current below 10kA and above 20kA.

Electroplating power supply 1000–50000A 0–48V ripple ≤3%

Low-ripple chrome plating power supply: 1000–50000A, ≤3% ripple

Output current1000–50000A
Output voltage0–48V
ripple≤3%
Voltage/current regulation≤1%
Control modeStepless SCR control
CoolingAir / air+water cooling
Full-load burn-in before shipment
IGBT PWM · full-bridge soft switching
Aviation / PLC / RS485 interface
CE marking · ISO9001 system

Selection conditions

Start with the ripple limit, not the current. Chrome finish reacts to ripple before it reacts to nameplate capacity, so set ≤3% in the technical condition. Then fix the current band between 1000A and 50000A and decide cooling by duty.

Corresponding parameters

Output spans 1000–50000A and 0–48V. Ripple sits at ≤3% and both regulation figures at ≤1%. Cooling follows current: forced air below 10kA, twelve-pulse water-cooled rectification above 20kA.

ParameterValue
Output current1000–50000A
Output voltage0–48V
Ripple≤3%
Voltage / current regulation≤1%
Cooling below 10kAforced air
Cooling above 20kAtwelve-pulse water-cooled rectification

Process fit

The middle current band between 10kA and 20kA is set by the technical agreement, not by a fixed page value. A line needing periodic reversal looks at the automatic reverse power supply, which shares the 1000–50000A envelope.

Lead time and warranty

Standard and custom builds ship in 15–20 days with a one-year warranty. Water-cooled versions need site water conditions confirmed before order; those values stay project-specific.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with Low-ripple chrome plating power supply current and cooling solution?

Send workpiece size, per-tank area and continuous run time; an engineer replies with a configuration the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279