JC POWER serves wafer furnaces and wide-bandgap device test with low-ripple DC. Furnace heating runs 1000–8000A at 0–55V with ±1% regulation and ≤0.5% ripple; device characterization uses a 0–1500V / 0–3000A supply at ≤1% regulation on air or water cooling.
JC POWER serves wafer furnaces and wide-bandgap device test with low-ripple DC. Furnace heating runs 1000–8000A at 0–55V with ±1% regulation and ≤0.5% ripple; device characterization uses a 0–1500V / 0–3000A supply at ≤1% regulation on air or water cooling.
Crystal growth needs a clean heater current, so ≤0.5% ripple leads the specification over a long run. Device testing needs voltage that ordinary low-voltage supplies cannot reach. Both cases put waveform quality above raw nameplate current.
Semiconductor furnaces use the semiconductor heating power supply at ±1% regulation with water cooling. Device characterization uses the silicon carbide (SiC) power supply with ≤0.5% ripple on both air and water builds.
Acceptance checks ≤1% regulation and ≤0.5% ripple at the operating voltage, with site water conditions confirmed for water-cooled units. Standard and custom units ship in 15–20 days and carry a one-year warranty.
· Set voltage and current for crystal growth heating from the furnace power curve, with output accuracy ±1% · For SiC testing, check ranges against 0–1500V / 0–3000A requirements · Confirm the ripple ceiling from process noise sensitivity, not just nameplate data · In cleanrooms, fit PLC / RS485 and verify cabinet installation and interference immunity
Sales 0757-81270279 · After-sales 17765622069
Email jiechuangkeji@163.com
Crystal growth needs a clean heater current, so ≤0.5% ripple leads the specification over a long run. Device testing needs voltage that ordinary low-voltage supplies cannot reach. Both cases put waveform quality above raw nameplate current.
Semiconductor furnaces use the semiconductor heating power supply at ±1% regulation with water cooling. Device characterization uses the silicon carbide (SiC) power supply with ≤0.5% ripple on both air and water builds.
Acceptance checks ≤1% regulation and ≤0.5% ripple at the operating voltage, with site water conditions confirmed for water-cooled units. Standard and custom units ship in 15–20 days and carry a one-year warranty.
View model specifications →



Answers follow a condition - parameters - recommended model format, so you can match your own line.
Crystal growth needs a clean heater current, so ≤0.5% ripple leads the specification over a long run. Device testing needs voltage that ordinary low-voltage supplies cannot reach. Both cases put waveform quality above raw nameplate current.
Semiconductor furnaces use the semiconductor heating power supply at ±1% regulation with water cooling. Device characterization uses the silicon carbide (SiC) power supply with ≤0.5% ripple on both air and water builds.
Acceptance checks ≤1% regulation and ≤0.5% ripple at the operating voltage, with site water conditions confirmed for water-cooled units. Standard and custom units ship in 15–20 days and carry a one-year warranty.
Scan to add a JC POWER engineer
Weekdays 8:30–18:00 · 0757-81270279