ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Selection and FAQ

Electroplating power supply selection: current, ripple, and cooling

The answers below use only parameters stated on product pages and confirmed business terms: ripple ≤3%, 0-60000A per unit, N+X redundancy, 15-20 day lead time and a 1-year warranty.

How do I size a rectifier for an electroplating line?

Set current, voltage, and ripple as separate limits. The electroplating rectifier runs 500–8000A at DC 0–12V with 6–96kW rated power and ≤1% voltage and current regulation. Chrome work uses the low-ripple series at 1000–50000A and ≤3% ripple. Set current before ripple.

What ripple specification matters for chrome plating?

The low-ripple chrome plating power supply holds ripple at ≤3% with ≤1% voltage and current regulation. Older sheets quoting 0.3% ripple no longer state a product guarantee. A standalone 1000A model designation is [To be confirmed]; the series range starts at 1000A.

For a 4000A plating rectifier, how do I set cooling and cable size?

4000A falls inside the 500–8000A electroplating range, so the standard rectifier applies, in air or water-cooled form. Water cooling needs site water quality, flow, pressure, and temperature confirmed. Cable cross-section is [To be confirmed] and belongs in the technical agreement.

Should I specify air cooling or water cooling?

The electroplating series offers both versions on the same 500–8000A platform. The low-ripple chrome series specifies forced air below 10kA and water-cooled twelve-pulse rectification above 20kA. The middle band is set in the technical agreement, not on this page.

How much current does a single-unit high frequency switching power supply deliver?

A single unit delivers 0–60000A. The water-cooled series also lists ≤1% voltage and current regulation and a 0.94 power factor. A fixed 24V model is not published here; parallel capacity follows the N+X scheme.

Switching power supply or SCR rectifier: which fits my line?

The high frequency switching supply reaches 0–60000A per unit at 0.94 power factor. The SCR rectifier lists ≤1% voltage and current regulation, AC 380V ±10%, and −10 to 45°C. Choose on current range and site temperature; PLC/RS485 control belongs to the switching platform.

Why does PCB plating call for pulse power?

The PCB electroplating supply delivers +40–800A forward peaks and −120–2400A reverse peaks. Switching takes ≤50μs and ripple stays below 1%. The pulse supply covers 0–50kA at 0–100% duty, with 5–40ms forward and 0.5–5.0ms reverse time. Board thickness and line width are set by the process, not fixed here.

Can an N+X redundant module be changed without stopping production?

On the drawer-type high frequency switching supply, a failed module is replaced without stopping the line. The synchronous model specifies N+X redundancy with current sharing within 1%. Site maintenance conditions go into the technical agreement.

What lead time and warranty should I expect?

Standard and custom models ship in 15–20 days, and the warranty runs one year. The catalogue snapshot lists ten series and dozens of standard models; current production follows the live product list. Delivery terms follow the specific contract signed by both parties.

Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279