ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Applications

Power supply applications: matching the supply to the process

JC POWER maps industrial DC supplies to seven process families from electroplating to crystal heating. Each process sets its own current, ripple, and control requirements, so selection starts from the tank or furnace rather than a generic catalog. Single-unit output reaches 0–60000A.

Test power supply应用:电动汽车 motor and engine test test bench
01

Test power supply

Process requirement: Voltage and current are programmable by curve, with fast dynamic response and repeatable test conditions.

Key parameters:0–30V / 300–3000A / 5–36kW、Voltage setting accuracy ≤0.1%、ripple ≤0.5%+0.3%FS、CV/CC/CP Auto-switching。

JC POWER model:Programmable DC test supply PFH4500 series,6U / 9U / 12U Rack-mounted air cooling,RS485 as standard、RS232 can be added / LAN Integrate into ATE systems。

EV motor testing Electronics burn-in test Battery testing Precision lab testing
Electroplating应用:PCB printed Circuit板 coating and circuit traces close-up
02

Electroplating

Process requirement: Uniform coating and stable deep-plating ability; ripple directly sets coating density.

Key parameters:ripple ≤3%(Decorative chrome/Hard chrome)、Current regulation ≤1%、Positive/negative pulse switching <50μs。

JC POWER model:Low-ripple chrome plating power supply / PCB electroplating power supply / Automatic reverse power supply。

Hardware plating PCB plating Low ripple Pulse/Reversing
Photovoltaic应用:太阳能 PV modules array
03

Photovoltaic

Process requirement: Smooth power curve throughout crystal growth, with no temperature-field drift.

Key parameters:0–55V Low-voltage high-current、Voltage setting Accuracy ±1%、water cooling。

Recommended model: Crystal furnace heating supply / bottom heating supply 1350A40V.

Crystal furnace heating Polycrystalline furnace heating graphite heating Stable temperature field
Electrolysis应用:electrolysis Copper foil generation机 and copper foil卷绕产线
04

Electrolysis

Process requirement: 24-hour continuous operation at constant current density; efficiency sets power cost per ton.

Key parameters:0–50000A、Current regulation ≤1%、N+X Redundant parallel。

Recommended model: Copper foil electrolysis supply / energy-saving metal electrolysis supply.

Rare-earth electrolysis Copper foil electrolysis Water treatment 24h Continuous
Semiconductor应用:chips and integrated circuits close-up
05

Semiconductor

Process requirement: Ultra-low ripple, fast response, EMI immunity and a repeatable process.

Key parameters:output Accuracy ±1%、ripple ≤3%、RS485/PLC Digital communication。

Recommended model: Crystal furnace heating supply / sapphire heating supply / SCR controller.

Semiconductor Crystal growth epitaxial furnace heating RF/Microwave support Ultra-low interference
Metallurgy应用:rare earth金属 ore raw material and mineral processing
06

Metallurgy

Process requirement: Withstands shock loads with millisecond temperature response, suiting dusty and hot sites.

Key parameters:0–12000A、output Accuracy ±1%、Over-current/Phase loss/Over-temperature and multiple protection。

Recommended model: Sapphire heating supply / SCR rectifier / energy-saving metal electrolysis supply.

Diamond synthesis Sapphire series Vacuum melting Withstands shock loads
Other custom builds:industrial power cabinets and electrical Control柜
07

Other custom builds

Process requirement: Non-standard processes and special voltage/current combinations are customized to the line.

Key parameters:by workpiece and Process custom current Voltage、Cooling and Control Interface。

Recommended model: All series and dozens of standard models can be adjusted by process, or built to order.

Special power supplies Defense research Custom builds waveform/Communication custom
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279