ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Test power supply/Programmable DC Test power supply

Programmable DC test power supply: 300–3000A, 5–36kW

JC POWER's programmable DC test power supply supports lab validation and burn-in racks. It covers 300–3000A and 5–36kW across 0–5V, 0–10V, and 0–30V ranges, with voltage setting accuracy at ≤0.1%. Voltage setting accuracy is ≤0.1% for validation and characterization work.

Test power supply 0–30V / 3000A Rack-mounted air cooling CE-certified model

Programmable DC test power supply: 300–3000A, 5–36kW

Output voltage0–5 / 0–10 / 0–30V
Single-unit current300–3000A
Single-unit power5–36kW
Voltage setting accuracy≤0.1%
Output ripple≤0.5%+0.3%FS
CoolingForced air
Full-load burn-in before shipment
supports parallel units Scaling
RS485 / LAN · ATE integration available
CE marking · ISO9001 system

Selection conditions

Choose the voltage range first. The unit offers 0–5V, 0–10V, and 0–30V variants, so match the device under test before looking at current. Then size current between 300A and 3000A and check the ripple figure.

Corresponding parameters

Voltage setting accuracy is ≤0.1%. Ripple is ≤0.5% + 0.3%FS, and power spans 5–36kW. Those figures matter in a test rack, where the source must be cleaner and better characterized than the device being measured.

ParameterValue
Voltage ranges0–5V / 0–10V / 0–30V
Current300–3000A
Power5–36kW
Voltage setting accuracy≤0.1%
Ripple≤0.5% + 0.3%FS

Process fit

Production burn-in uses the benchtop high frequency switching power supply at 0–1000kVA. Test work needs the tighter ≤0.1% setting accuracy on this unit. The SiC supply serves device characterization at higher voltage.

Lead time and warranty

Standard and custom builds ship in 15–20 days with a one-year warranty. Test voltage and current are set by the device under test, not fixed on this page.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with the measurement range and lead time of a programmable DC test supply?

Send us the voltage, peak current and test sequence of the device under test; our engineers reply with a configuration the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279