ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Anodizing power supply/Hard anodizing power supply

Hard anodizing power supply: 500:1 on/off ratio, 1–32min soft start

JC POWER's hard anodizing power supply builds thick oxide layers on aluminum with a controlled on/off cycle. It offers a maximum 500:1 duty ratio, a 1–32min soft start, ±1% output accuracy, and DC, multi-stage curve, single-pulse, and dual-pulse modes. Four modes cover DC, multi-stage curve, single and dual pulse.

Anodizing power supply Custom per process CE-certified model

Hard anodizing power supply: 500:1 on/off ratio, 1–32min soft start

Input voltageThree-phase AC380V±10%,50/60Hz
Max on/off ratio500:1
Soft-start time1~32min
Output accuracy±1%
Output waveformDC, multi-stage curve, single pulse, DC + pulse, dual pulse
Full-load burn-in before shipment
N+X redundant parallel support
PLC / RS485 remote control
CE marking · ISO9001 system

Process pain points

Hard coating generates heat faster than a plain DC ramp can manage. Without a long soft start and an off interval, the layer burns instead of growing. The power supply has to shape the cycle, not simply deliver current.

What the power supply must deliver

The on/off ratio reaches 500:1 and soft start runs from 1 to 32 minutes. Output accuracy is ±1%. Operators choose DC, a multi-stage curve, single pulse, or dual pulse depending on the part and the coating spec.

ParameterValue
Maximum on/off ratio500:1
Soft start1–32min
Output accuracy±1%
ModesDC / multi-stage curve / single pulse / dual pulse

Matching model

Standard profile coating uses the anodizing power supply at 0–1000kVA with 1%–3% ripple. Micro-arc oxidation has its own platform. Hard coating stays with this unit because of the duty ratio and ramp control.

Verification

Acceptance checks the soft start range, the 500:1 ratio, and ±1% accuracy against the coating recipe. Standard and custom builds ship in 15–20 days with a one-year warranty. Current density is set by the process.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with Hard anodizing power supply selection and lead time?

Send workpiece size, tank volume and target current density; an engineer replies the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279