ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Anodizing power supply/AC/DC coloring supply

AC/DC coloring power supply: DC 0–25V / 0–25kA, AC 0–30V / 0–15kA

JC POWER's AC/DC coloring power supply adds electrolytic color to anodized profiles with both DC and AC stages. It delivers DC 0–25V at 0–25kA, AC 0–30V at 0–15kA, and holds output accuracy at ±1%. The AC stage follows oxide formation on the DC stage.

Anodizing power supply Custom per process CE-certified model

AC/DC coloring power supply: DC 0–25V / 0–25kA, AC 0–30V / 0–15kA

Input voltageThree-phase AC380V ±10%50Hz/60Hz
Output DC voltageDC 0-25v
Output DC currentDC 0-25KA
Output AC voltageAC 0-30V
Output AC currentAC 0-15KA
Input waveformThree-phase AC sine wave
Full-load burn-in before shipment
N+X redundant parallel support
PLC / RS485 remote control
CE marking · ISO9001 system

Process pain points

A plain DC anodizing supply cannot produce the bronze and champagne shades that come from electrolytic coloring. The color stage needs an AC waveform at a lower voltage, delivered after the oxide layer is formed, at high current.

What the power supply must deliver

The DC stage covers 0–25V and 0–25kA for coating formation. The AC stage covers 0–30V and 0–15kA for coloring. Output accuracy is ±1% on both stages, so the color repeat stays tied to a recorded setpoint.

ParameterValue
DC output0–25V / 0–25kA
AC output0–30V / 0–15kA
Output accuracy±1%

Matching model

Profile lines build the oxide layer with the anodizing power supply at 0–1000kVA and 1%–3% ripple, then hand the parts to this unit for coloring. Hard coating stays with the 500:1 duty-ratio model instead.

Verification

Acceptance checks both output stages against the ±1% accuracy figure and records the color setpoint. Standard and custom builds ship in 15–20 days with a one-year warranty.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with AC/DC coloring supply selection and lead time?

Send workpiece size, tank volume and target current density; an engineer replies the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279