JC POWER heats single-crystal and sapphire furnaces from pullers to large boules. The crystal furnace platform runs 1000–3000A at 0–55V with IGBT control and ±1% voltage regulation; sapphire growth extends to 1000–10000A on a dedicated unit with ±1% voltage precision and water cooling.
JC POWER heats single-crystal and sapphire furnaces from pullers to large boules. The crystal furnace platform runs 1000–3000A at 0–55V with IGBT control and ±1% voltage regulation; sapphire growth extends to 1000–10000A on a dedicated unit with ±1% voltage precision and water cooling.
The hot-zone resistance and target furnace power set the current and voltage. Long growth cycles demand stable output, which is why ±1% precision matters over days rather than seconds. Bottom heaters need their own current profile and a separate supply.
Standard pullers use the crystal furnace heating power supply with IGBT pulse-width modulation. Sapphire boules use the sapphire crystal growth heating power supply at 0–55V. Bottom heaters use the single crystal bottom heating power supply at 1400A/55V and 0–77kVA.
Calculate hot-zone resistance before selecting a model, then check ±1% precision at the specified current over a trial run. Heater resistance is a furnace input and is not fixed here. Lead time runs 15–20 days for standard and custom builds; the warranty lasts one year.
· Back-calculate current from heater resistance and target power, leaving adjustment margin by furnace type · Crystal growth furnaces: 0–55V, 1000–3000A, voltage setting accuracy ±1% · Sapphire furnaces: 0–12V; check stability and main/auxiliary ratio · When bottom heating is controlled separately, configure it on a separate branch from the main heater
Sales 0757-81270279 · After-sales 17765622069
Email jiechuangkeji@163.com
The hot-zone resistance and target furnace power set the current and voltage. Long growth cycles demand stable output, which is why ±1% precision matters over days rather than seconds. Bottom heaters need their own current profile and a separate supply.
Standard pullers use the crystal furnace heating power supply with IGBT pulse-width modulation. Sapphire boules use the sapphire crystal growth heating power supply at 0–55V. Bottom heaters use the single crystal bottom heating power supply at 1400A/55V and 0–77kVA.
Calculate hot-zone resistance before selecting a model, then check ±1% precision at the specified current over a trial run. Heater resistance is a furnace input and is not fixed here. Lead time runs 15–20 days for standard and custom builds; the warranty lasts one year.
View model specifications →




Answers follow a condition–parameter–recommended model format so you can match them to your own line.
The hot-zone resistance and target furnace power set the current and voltage. Long growth cycles demand stable output, which is why ±1% precision matters over days rather than seconds. Bottom heaters need their own current profile and a separate supply.
Standard pullers use the crystal furnace heating power supply with IGBT pulse-width modulation. Sapphire boules use the sapphire crystal growth heating power supply at 0–55V. Bottom heaters use the single crystal bottom heating power supply at 1400A/55V and 0–77kVA.
Calculate hot-zone resistance before selecting a model, then check ±1% precision at the specified current over a trial run. Heater resistance is a furnace input and is not fixed here. Lead time runs 15–20 days for standard and custom builds; the warranty lasts one year.
Scan to add a JC POWER engineer
Weekdays 8:30–18:00 · 0757-81270279