ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Applications/PCB plating

PCB deep-hole plating power supply: pulse timing and ripple

JC POWER serves PCB lines where high aspect ratio holes decide quality. The PCB electroplating power supply delivers +40–800A forward and −120–2400A reverse peaks, switches in ≤50μs, and holds ripple below 1% under load with panel, meter-box, and RS485 control.

JC POWER serves PCB lines where high aspect ratio holes decide quality. The PCB electroplating power supply delivers +40–800A forward and −120–2400A reverse peaks, switches in ≤50μs, and holds ripple below 1% under load with panel, meter-box, and RS485 control.

What the process demands

Straight DC cannot throw metal into a deep barrel wall; a reverse pulse pulls metal back from the high-current edge. Changeover must be fast, which is why ≤50μs leads the specification. Ripple below 1% keeps the deposit even.

Which model corresponds

Deep-hole and fine-line boards use the PCB electroplating power supply with panel, meter-box, and RS485 control. Broader millisecond pulse recipes use the pulse power supply at 0–50kA with 0–100% duty. Etching uses the high frequency etching power supply at ≤1% ripple.

How to verify the match

Record the ≤50μs switching time and ripple below 1% under load at acceptance. Board thickness and line width are process inputs and are not fixed here. A one-year warranty applies to standard and custom units, which ship within 15–20 days.

Common configuration approach

· Set forward peak current by board thickness, trace width and effective plating area · Size reverse peak current to the through-hole levelling requirement rather than a fixed ratio · Treat switching <50μs and ripple <1% as the baseline for high-aspect-ratio boards · Add an automatic control system with parameter download and logging for multi-station lines

Need selection help?

Sales 0757-81270279 · After-sales 17765622069
Email jiechuangkeji@163.com

01 / Process requirement

What the process demands

Straight DC cannot throw metal into a deep barrel wall; a reverse pulse pulls metal back from the high-current edge. Changeover must be fast, which is why ≤50μs leads the specification. Ripple below 1% keeps the deposit even.

02 / Parameter floor

Which model corresponds

Deep-hole and fine-line boards use the PCB electroplating power supply with panel, meter-box, and RS485 control. Broader millisecond pulse recipes use the pulse power supply at 0–50kA with 0–100% duty. Etching uses the high frequency etching power supply at ≤1% ripple.

03 / Recommended model

How to verify the match

Record the ≤50μs switching time and ripple below 1% under load at acceptance. Board thickness and line width are process inputs and are not fixed here. A one-year warranty applies to standard and custom units, which ship within 15–20 days.

View model specifications →

Matching models

Selection FAQ

Answers follow a condition–parameter–recommended model format so you can match them to your own line.

What the process demands?

Straight DC cannot throw metal into a deep barrel wall; a reverse pulse pulls metal back from the high-current edge. Changeover must be fast, which is why ≤50μs leads the specification. Ripple below 1% keeps the deposit even.

Which model corresponds?

Deep-hole and fine-line boards use the PCB electroplating power supply with panel, meter-box, and RS485 control. Broader millisecond pulse recipes use the pulse power supply at 0–50kA with 0–100% duty. Etching uses the high frequency etching power supply at ≤1% ripple.

How to verify the match?

Record the ≤50μs switching time and ripple below 1% under load at acceptance. Board thickness and line width are process inputs and are not fixed here. A one-year warranty applies to standard and custom units, which ship within 15–20 days.

Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279