ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Electroplating power supply/PCB electroplating power supply

PCB electroplating power supply: +40–800A / −120–2400A pulse, ≤50μs switching

JC POWER's PCB electroplating power supply handles deep-hole and high-aspect-ratio boards with controlled reverse pulse. Forward peaks run +40–800A and reverse peaks −120–2400A. Changeover takes ≤50μs and ripple stays below 1%. Panel, meter-box, and RS485 control log each board recipe.

Electroplating power supply Positive/negative pulse PR series 7 Model ripple <1%

PCB electroplating power supply: +40–800A / −120–2400A pulse, ≤50μs switching

Peak current (forward)40–800A
Peak current (reverse)120–2400A
Polarity changeover≤50μs
ripple<1%
buildFlat drawer with handle
InterfacePanel / meter box / RS485
Full-load burn-in before shipment
IGBT PWM · full-bridge soft switching
Aviation / PLC / RS485 interface
CE marking · ISO9001 system

Process pain points

Deep holes starve of metal when current cannot reach the barrel wall. Straight DC throws most of its metal at the surface. A reverse pulse pulls metal back from the high-current edge and drives it into the hole, but only if the changeover is fast.

What the power supply must deliver

Forward peaks span +40–800A and reverse peaks −120–2400A. Changeover takes ≤50μs and ripple stays below 1%. The unit offers panel, meter-box, and RS485 control so setpoints can be logged with the board recipe.

ParameterValue
Forward pulse peak+40–800A
Reverse pulse peak−120–2400A
Switching time≤50μs
Ripplebelow 1%
Controlpanel / meter box / RS485

Matching model

Board thickness, line width, and plating area set the recipe; they are process inputs, not fixed page values. When a line needs broader pulse timing, the pulse power supply covers 0–50kA with adjustable forward and reverse times.

Verification

Acceptance records the ≤50μs switching time and ripple below 1% under load. Standard and custom builds ship in 15–20 days with a one-year warranty. Board-specific current is set by the process engineer.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with PCB electroplating power supply of Model and pulse parameters?

Send board thickness, min hole size, aspect ratio and panel area; an engineer replies with a suggestion the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279