ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Anodizing power supply/Micro-arc oxidation power supply

Micro-arc oxidation power supply: 0–1000kVA, ≤1% regulation

JC POWER's micro-arc oxidation power supply forms ceramic-like coatings on aluminum, magnesium, and titanium parts. It covers 0–1000kVA with ≤1% voltage and current regulation, a 0.94 power factor, and efficiency up to 96%. The voltage swing suits spark discharge on aluminum and magnesium.

Anodizing power supply Custom per process CE-certified model

Micro-arc oxidation power supply: 0–1000kVA, ≤1% regulation

Input voltageThree-phase AC380V ±10%, 50Hz+3Hz
Voltage regulation≤1%
Current regulation≤1%
Rated efficiencyUp to 96%
Power0-1000KVA
Power factor0.94
Full-load burn-in before shipment
N+X redundant parallel support
PLC / RS485 remote control
CE marking · ISO9001 system

Selection conditions

Check the substrate and coating thickness first. Micro-arc oxidation runs at higher voltage than ordinary anodizing, so confirm the voltage envelope before fixing the model. Then set regulation and review the cooling arrangement.

Corresponding parameters

Power spans 0–1000kVA. Voltage and current regulation both sit at ≤1%, power factor at 0.94, and efficiency reaches up to 96%. The platform supports the voltage swing that spark discharge needs.

ParameterValue
Power range0–1000kVA
Voltage / current regulation≤1%
Power factor0.94
Efficiencyup to 96%

Process fit

Profile anodizing uses the standard 0–1000kVA unit at 1%–3% ripple; hard coating uses the 500:1 duty-ratio model. Micro-arc oxidation sits apart because the coating mechanism differs, even though the power envelope overlaps.

Lead time and warranty

Standard and custom builds ship in 15–20 days with a one-year warranty. Coating thickness is a process target, not a fixed product value, and belongs in the technical agreement.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with Micro-arc oxidation power supply selection and lead time?

Send workpiece size, tank volume and target current density; an engineer replies the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279