Process pain points
SiC devices are tested at voltages that ordinary low-voltage supplies cannot reach, and the source must stay clean while it swings across that range. A narrow 0–55V heater supply is not useful here.
What the power supply must deliver
Output spans 0–1500V and 0–3000A, a much wider voltage range than plating or heating units. Voltage regulation is ≤1% and ripple ≤0.5%. Both cooling options are offered for different duty cycles.
| Parameter | Value |
|---|---|
| Output voltage | 0–1500V |
| Output current | 0–3000A |
| Voltage regulation | ≤1% |
| Ripple | ≤0.5% |
| Cooling | air or water |
Matching model
Semiconductor furnace heating uses the 1000–8000A heating supply at 0–55V. Device characterization uses this broader 0–1500V platform. Programmable test work at lower voltage uses the programmable DC test power supply.
Verification
Acceptance checks ≤1% regulation and ≤0.5% ripple across the operating voltage range. Standard and custom builds ship in 15–20 days with a one-year warranty.



