Selection conditions
Ask whether the line permits parallel modules. N+X redundancy is written into this model, with current sharing within 1%. That figure is easy to miss during selection. Remote integration uses the PLC/RS485 port, which connects directly to a host controller.
Corresponding parameters
Voltage regulation and current regulation each sit at ≤1%. Power factor is 0.94 and total current harmonic content stays below 5%. Efficiency reaches up to 96%; treat that as an upper figure, not a guaranteed operating point.
| Parameter | Value |
|---|---|
| Voltage / current regulation | ≤1% |
| Power factor | 0.94 |
| Ripple | below 5% |
| Total current harmonics | below 5% |
| Current sharing | within 1% |
| Redundancy | N+X |
| Control | PLC / RS485 |
| Cooling | water |
| Burn-in | full load, 24 hours |
Process fit
Current sharing within 1% decides how modules split load after paralleling. Total current harmonics below 5% determines whether a site needs extra harmonic treatment, and that belongs in the power distribution review. The PLC/RS485 port feeds the line control system.
Lead time and warranty
Standard and custom builds ship in 15–20 days with a one-year warranty. The 24-hour full-load burn-in is the published figure; acceptance limits belong in the technical agreement. Drawer-type versions allow a failed module to be changed without stopping the line.



