ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/Pulse and reversing power supply/Automatic reverse power supply

Automatic reverse power supply: 1000–50000A, 0–48V

JC POWER's automatic reverse power supply handles plating cycles that switch polarity on a schedule. It covers 1000–50000A at 0–48V, runs output at 10%–100% of rating, and holds voltage and current regulation at ≤1%. Timed polarity reversal removes operator-dependent batch variation.

Pulse and reversing power supply Custom per process CE-certified model

Automatic reverse power supply: 1000–50000A, 0–48V

Input voltageThree-phaseAC380V±10%50Hz+3Hz
Output rangeVoltage、Common current, 10%–100% of rated
Output current1000-50000A
Output voltage0-48V
Voltage regulation≤1%
Current regulation≤1%
Full-load burn-in before shipment
N+X redundant parallel support
PLC / RS485 remote control
CE marking · ISO9001 system

Process pain points

Manual polarity switching makes batch quality depend on the operator. A timed reverse cycle gives every load the same history, but only if the supply holds its regulation through the changeover. That is where a dedicated unit earns its place.

What the power supply must deliver

Output reaches 1000–50000A and 0–48V with regulation at ≤1%. Operators can set output anywhere from 10% to 100% of rating. The periodic reverse cycle is built into the unit rather than added by external contactors.

ParameterValue
Output current1000–50000A
Output voltage0–48V
Output setting10%–100% of rating
Voltage / current regulation≤1%

Matching model

Chrome lines that need low ripple use the low-ripple chrome series, which shares the 1000–50000A range and adds a ≤3% ripple figure. For deeper reverse-pulse control on boards, the PCB electroplating power supply handles the ≤50μs changeover.

Verification

Acceptance checks the 10%–100% setting range and ≤1% regulation at the recorded test points. Standard and custom builds ship in 15–20 days with a one-year warranty.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with Automatic reverse power supply selection and lead time?

Send workpiece size, tank volume and target current density; an engineer replies the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279