ISO9001:2015 certification CE marking Specialized & new enterprise 10 series · dozens of standard models
Home/Products/High frequency switching power supply/Electrode foil forming power supply

Electrode foil forming power supply: ≤3% ripple, ≤1% stability

JC POWER's electrode foil forming power supply holds the anodizing current used to grow dielectric film on aluminum foil. It keeps current and voltage stability within ≤1%, ripple at ≤3%, efficiency up to 96%, and power factor at ≥0.9. Power factor is at least 0.9 on the forming platform.

High frequency switching power supply Custom per process CE-certified model

Electrode foil forming power supply: ≤3% ripple, ≤1% stability

Input voltage rangeThree-phase380V±10% 50/60HZ
Output current stability≤1%
Output voltage stability≤1%
ripple≤3%
Overall efficiencyUp to 96%
Power factor≥0.9
Full-load burn-in before shipment
N+X redundant parallel support
PLC / RS485 remote control
CE marking · ISO9001 system

Selection conditions

Set the ripple ceiling before the current. Film formation reacts to ripple, so ≤3% belongs in the technical condition. Then confirm the forming voltage and current for the foil grade, and check the plant power factor requirement.

Corresponding parameters

Current and voltage stability sit at ≤1%. Ripple is ≤3%, efficiency reaches up to 96%, and power factor is ≥0.9. Those figures sit together because forming quality and utility cost are both part of the selection.

ParameterValue
Current / voltage stability≤1%
Ripple≤3%
Efficiencyup to 96%
Power factor≥0.9

Process fit

Copper foil generation uses the copper foil electrolysis power supply with 5% ripple and water cooling. Forming needs the tighter ≤3% figure because the dielectric film reacts to the waveform. The two stages are separate lines.

Lead time and warranty

Standard and custom builds ship in 15–20 days with a one-year warranty. Forming voltage and foil grade are process inputs and are not fixed on this page.

Parameter note The technical parameters, performance figures and function descriptions on this page are general reference values for the product series. They are for selection guidance only and do not constitute an offer or commitment. Rated parameters, dimensions, interfaces and delivery standards for a specific model are governed by the signed delivery contract (technical agreement) and the factory test report. Actual performance depends on site grid quality, load characteristics, ambient temperature and installation. We reserve the right to adjust specifications, structure and appearance without notice where usability is not affected.

Need help with Electrode foil forming power supply selection and lead time?

Send workpiece size, tank volume and target current density; an engineer replies the same day.

Request a quote Call 0757-81270279
Call WeChat Email Inquiry

Scan to chat with an engineer

Scan to add a JC POWER engineer

WeChat QR code

Weekdays 8:30–18:00 · 0757-81270279