Fax:0757-86798148
Aftermarket:0757-86795444
Q Q:1477182165
Mainly applied in mono-crystal furnace、multi-crystal furnace heading and similar load heating.
1. The controller has a simple structure, low noise, increasing the quality of the product.
2. The controller adopts stack control, possessing the advantages of high power factor, high conversion efficiency, and low harmonic wave.
3. Using constant power control mode, the precision is up to ±0.5KW.
4. Possessing a soft start, over-current, overtemperature, lack of phase, and many other automatic protection functions, and sound and light alarm function.
5. Adopting digital control, high control precision, strong anti-interference ability to ensure the stability of the system.
6. With a standard industrial interface, it has remote control and data feedback.
Power | 0~120KVA | |
Circuits | Thyristor ripple | |
Control | Touch screen control or Table control(long range/short range) | |
(AC input) | Phase | Three phase |
Voltage | AC 380V±10% | |
Frequency | 50HZ±3HZ | |
Output | Output current | AC 0-240A Continuously adjustable Precision ±1% |
Output voltage | AC 0-380V Continuously adjustable Precision ±1% | |
Output power | 0-120KW Continuously adjustable Precision ±0.5% | |
Output waveform | AC waveform | |
Operating mode Output | Constant power control Constant power:The output power is stable in the pressure limiting current limiting range | |
Power Factor | ≥75% | |
environment temperature | 0℃-45℃ | |
operating hours | Full load long time operating | |
Protection procedures | Input voltage is too low or too high, input phase loss, output over-voltage or over-current, short-circuit, overheat | |
Output feedback | 4-20MA /0-10V Corresponding to rate | |
Input control | 4-20MA /0-10V Corresponding to rate | |
Cooling type | Air-cooled type |