PRODUCTS
CONTACT
Sell:0757-81270279
Fax:0757-86798148
Aftermarket:0757-86795444
Q Q:1477182165
Fax:0757-86798148
Aftermarket:0757-86795444
Q Q:1477182165
Electrophoretic coating power
Electrophoretic coating power
1.The filtering component of high performance and low ripple potentiometereffectively inhibit the rectifier output voltage, electrophoresis coating productionprocess must meet the requirements of low ripple output.
2.The stepping into static electrophoresis production line, the workpiece in the process of electrophoresis, often require the DC voltage from low to high, time-sharing, section output, each voltage and the running time according to the electrophoresis process requirements can be set individually. According to this situation, the machine increases the segmentation output voltage function, userscan set their own, each section of voltage and time (number of segments is determined by the user, a voltage adjustable). To meet the progress of staticelectrophoresis time interval is the production requirements, the user only needs toissue instructions in the process at the beginning (input switch signal),electrophoresis process will be automatically completed, the end of a process, the output voltage automatic zero volts.
3.Touch screen controland operation can be used to set parameters such as voltage, current, voltagesegmentation, segmentation time, etc. At the same time, remote control andremote control are used to fully automate the electrophoresis process.
4.With a lack ofphase, over temperature, over current, over voltage, short circuit and otherperfect protection and alarm system.
Control screen
Output voltage :0-1000V
Can be customized according to customer requirements
Input Voltage | Three-phase 380V ± 10% 50/60HZ |
Output Current | 10-50000A |
The output voltage | 50-500V |
Output Range | Voltage, current common, nominal 10% -100% |
Control | Continuous stepless control |
Rated. Cooling | Continuous forced air / water |
Rated voltage control accuracy | Within ± 1% of rated DC voltage value |
Rated current control accuracy | Within ± 1% of rated DC current value |
Ripple factor | ≤ |
Installation Site | Indoor |
Ambient temperature | -10~40℃ |
Relative Humidity | 30%~85% |
Altitude | Below 1000m |